top of page
New Mineral Armor Logo.png
Nano Ceramic Floor Protection System

IEM is the exclusive US distributor of Mineral Armor, a revolutionary floor cleaning system that entirely eliminates the need to ever wax again. Mineral Armor's patent-pending formula contains Colloidal Silica, which bonds with surfaces at the molecular level, filling any pores in VCT, Terrazzo, concrete or any other solid-surface stone.  

Mineral Armor crates a shield that makes floors resistant to stains, scuffs and yellowing, while increasing shine.  The unique properties of Mineral Armor also increases slip-resistance of floors, while increasing the surface to a pH of 12, which inhibits the growth of bacteria.  

The application and maintenance process is simple.  After removing the existing floor wax, apply the Mineral Armor Restore product and buff the floors to a gloss.  All that is required to maintain the surface shield and bacteria-inhibiting pH level is periodic mopping with Mineral Armor Protect.  This process will keep your keep your floors, cleaner and easier to maintain, slip-resistant an healthier.  It will also save time and money from your cleaning budget, while eliminating dangerous VOC laden cleaning and stripping chemicals, making for a healthier facility. 

IMG_7097.heic
Mineral Armor Check.jpg
Cleaner Floors

Mineral Armor's crystalline properties create a
permanent protective layer
on all types of resilient floors including VCT, terrazzo, and concrete floors which eliminate dusting, marks, and discoloration while making the surface resistant to spills, etching, and soiling. Floors stay cleaner with Mineral Armor and require less maintenance.

Slip-Resistant Floors

Mineral Armor's crystalline silica structure creates a clear, transparent, and slip-resistant floor. This 100% mineral structure forms a protective layer of crystals which increase traction while allowing oxygen and humidity transfer preventing a film-forming slippery surface common with traditional floor finish systems.

Healthier Facilities

MineralShine's crystalline silica structure creates a clear, transparent, and slip-resistant floor. This 100% mineral structure forms a protective layer of crystals which increase traction while allowing oxygen and humidity transfer preventing a film-forming slippery surface common with traditional floor finish systems.

split2.png
A New Dimension of Clean

Every other green cleaning product contains detergents, which dirt clings to and then the detergent, along with the dirt is then extracted.  The trouble is that a reside of detergent remains, which then attracts more soiling, creating a never-ending cycle of cleaning

 

Our line of Split! non-detergent cleansers breaks this cycle by literally breaking the soil into molecules so small that they are no longer a solid and can be wiped away, leaving no residue to attract further grime.  

 

Split! gives you a truly clean surface that not only removes the dirt, but also the residual cleaning materials, leaving nothing behind, which will reduces the frequency of cleaning. Carpets cleaned with Split! will stay cleaner up to eight times longer than when cleaned with traditional detergent products. 

Split! gets you facility cleaner, keeps it cleaner and for lower labor costs than  any other cleaning product. 

Motor Oil and Grease

Split! is an incredible cleaner of oil and grease stains.  Even set-in stains will dissolve, nearly on-contact and simply wiped away.

s5vo5cgax7031.jpg
Measurable Clean

ATP meters analyze measure the molecules on a surface to determine its level of hygiene and cleanliness.  Readings of under 10 are considered to be a "pass" and anything under 30 as "caution."  Detergent cleaners can reduce the levels near 30, but only Split! can reduce these levels to near, or even at "zero." 

Are you scrubbing or mopping your floors every day? With Split! you can reduce the frequency to every other day, with just a microfiber dusting on the alternate day. Saving time, cleaners and money.

Over time, layers of soap, and dirt settle into the hard to clean grout lines that traditional cleaning protocols just don't get clean.  Split! makes easy cleaning of grout and and in restrooms, entirely eliminates the order-causing bacteria that thrives on restroom floors.

All of this is achieved with a totally green cleaner. 

Kills Bacteria and Viruses

Most bacteria and viruses live in a pH range of 4.8 to 9.2 but the majority of cleaners only have a pH of 7 to 8.5, so the bacteria remain.  Split! has a pH nearing 12, which creates an environment, where viruses and bacteria cannot survive.  A high residual pH tends to remain on cleaned surfaces, maintaining a level of clean that cannot be achieved by the residue leaving detergent cleaners.  

SplitpH.png
Cleaner Floors
green_seal_certified-350x334.png
Undercoat.jpg

Split! makes easy work of cleaning carpets. This office, in a truck factory had excessive staining from undercoating.  A light mist applied, and removal with a pad and swing machine completely restored the carpet. 

Cleaner Carpets with Less Cleaning

The low-moisture carpet cleaning process, using Split! will result in cleaner carpets, that stay cleaner longer and will eliminate any spotting or ground-in traffic patterns in your carpets.  

Now that your carpets are free of detergent residue, your vacuum will effiecntly remove any dirt, before it becomes trapped in the carpet's fibers.  

Enjoy savings with  fewer carpet cleanings and have better looking facility, free of stains and soiled heavy traffic areas. 

Contact Us for a Free Sample

Thanks for submitting!

bottom of page